AW-CFP2166-4-8

4 Zone Fire Alarm Control Panel AW-CFP2166-4-8

Four-zone conventional fire panel for offices, schools and small commercial buildings, expandable as the building grows.

Conventional fire detection
EN 54-2 / EN 54-4 design
LPCB approved range
Modular zone expansion

Request quote — AW-CFP2166-4-8 WhatsApp enquiry +254 720 359 107

Your enquiry carries the brand and exact model number automatically — no need to type it.

At a glance

Key features

Product type
Conventional Fire Alarm Control Panel
Zones
4
Expansion
Modularised design; expandable from 1 zone to 32 zones
Sounder output
2 x 0.75A maximum
Mains supply
220VAC 50Hz, +10% / -15%
System voltage
24VDC typical
Batteries
2 x 12V / 2.3Ah sealed lead acid gel, self-regulated; 2 x 12V / 7Ah if needed
Series
AW-CFP2166

Only specifications published by the manufacturer for this model are listed. Anything not yet verified is confirmed in writing when we quote.

Specification

Technical specifications

Brand: Asenware
Model: AW-CFP2166-4-8
Product name: 4 Zone Fire Alarm Control Panel AW-CFP2166-4-8
Unit of sale: Piece
Technology: Conventional fire detection, EN 54-2 / EN 54-4 design, LPCB approved range, Modular zone expansion
Zones: 4
Expansion: Modularised design; expandable from 1 zone to 32 zones
AC input: 220VAC 50Hz, +10% / -15%
DC output: 24VDC typical
Voltage for MCU: 5V for power board MCU, 3.3V for others
Current at 24VDC from PSE: 450mA standby current
Maximum current from PSE: 2A except batteries charge
Batteries current: 1.85A maximum, current limited
Auxiliary output: 24VDC +/- 10%, 100 mA max, current limited, monitored
Batteries: 2 x 12V / 2.3Ah sealed lead acid gel, self-regulated; 2 x 12V / 7Ah if needed
Battery low-voltage protection: 22.2V
Zone alarm current: 6mA minimum / 27mA maximum
Sounder output: 2 x 0.75A maximum
Fire protection output: 100mA maximum
Fire routing output: 100mA maximum
Fault routing output: 100mA maximum
Relay contacts rating: Dry contacts (NO/NC) 1A @ 24VDC
Fuse on power board: 3A / 250V glass tube fuse 20mm
Fuse on EMI board: 1A / 250V glass tube fuse 20mm
Terminal blocks rating: All terminals rated for 12 to 18 AWG (0.75 to 2.5 mm²)
Detectors connection allowed each zone: 20 (except MCPs)
Communication protocol: 2 wires RS485 bus system
EOL resistor for zone: 6.8K 1W
EOL resistor for outputs: 6.8K 1W
Environmental: Class A temperature range: -5 to 50°C; humidity 5 to 95% RH, non-condensing