Asenware
AW-CFP2166-4-8
4 Zone Fire Alarm Control Panel AW-CFP2166-4-8
- Conventional Fire Alarm Control Panel
Request quoteDetails
Manufacturer photograph matched to this exact model number.
Asenware · Control Panels
AW-CFP2166-2
2 Zone Fire Alarm Control Panel AW-CFP2166-2
Entry-level two-zone conventional fire panel for small premises where detection is split into two clearly identified areas.
- Conventional fire detection
- EN 54-2 / EN 54-4 design
- LPCB approved range
- Zone disablement
Your enquiry carries the brand and exact model number automatically — no need to type it.
At a glance
Key features
Product type
Conventional Fire Alarm Control Panel
Zones
2
Sounder output
2 x 0.75A maximum
Mains supply
220VAC 50/60Hz, +10% / -15%
System voltage
24VDC typical
Batteries
2 x 12V / 2.3Ah sealed lead acid gel, self-regulated
Series
AW-CFP2166
Only specifications published by the manufacturer for this model are listed. Anything not yet verified is confirmed in writing when we quote.
Specification
Technical specifications
- Brand
- Asenware
- Model
- AW-CFP2166-2
- Product name
- 2 Zone Fire Alarm Control Panel AW-CFP2166-2
- Unit of sale
- Piece
- Technology
- Conventional fire detection, EN 54-2 / EN 54-4 design, LPCB approved range, Zone disablement
- Zones
- 2
- AC input
- 220VAC 50/60Hz, +10% / -15%
- DC output
- 24VDC typical
- Voltage for MCU
- 5V for MCU
- Current at 24VDC from PSE
- 450mA standby current
- Maximum current from PSE
- 1A except batteries charge
- Batteries current
- 1.85A maximum, current limited
- Auxiliary output
- 24VDC +/- 10%, 100 mA max, current limited, monitored
- Batteries
- 2 x 12V / 2.3Ah sealed lead acid gel, self-regulated
- Battery low-voltage protection
- 21V
- Zone alarm current
- 6mA minimum / 27mA maximum
- Sounder output
- 2 x 0.75A maximum
- Fire relay
- 1A / 30VDC maximum
- Fault relay
- 1A / 30VDC maximum
- Fuse for AC power
- 1A / 250V glass tube fuse 5 x 20mm
- Fuse on DC power
- 1A / 250V glass tube fuse 5 x 20mm
- Terminal blocks rating
- All terminals rated for 12 to 18 AWG (0.75 to 2.5 mm²)
- Detectors connection allowed each zone
- 20 (except MCPs)
- Communication protocol
- 2 wires RS485 bus system
- EOL resistor for zone
- 6.8K 1W
- EOL resistor for outputs
- 6.8K 1W
- Environmental
- Class A temperature range: -5 to 50°C; humidity 5 to 95% RH, non-condensing
Specifications verified from the manufacturer's official product information. The product image shown is verified manufacturer imagery.
A manufacturer datasheet is not published for download here. Ask us and we will send the current datasheet for this model with your quotation.
Where it fits
Suitable applications
- Offices, banks and commercial buildings
- Schools, hospitals and institutions
- Hotels, malls and public premises
- Warehouses, factories and stores
- Apartment blocks and residential developments
If your site is not listed, tell us what you need to cover and we will advise whether this model suits it.
Catalogue classification
- Category
- Fire Alarm & Detection
- Subcategory
- Control Panels
- Product type
- Conventional Fire Alarm Control Panel
Pricing is not published. We quote per project based on quantity, site and installation scope.
Related products
Other conventional fire alarm control panel models we supply
Asenware
AW-CFP2166-04-16
8 Zone Fire alarm control Panel
- Conventional Fire Alarm Control Panel
Request quoteDetails
Asenware
AW-CSD381
LPCB EN54 approve conventional smoke detector AW-CSD381
- Conventional Smoke Detector
Request quoteDetails
Asenware
AW-CTD382
Conventional heat detector with LPCB EN54 certification AW-CTD382
- Conventional Heat Detector
Request quoteDetails