Secure Appliances Ltd logoSECURE APPLIANCESSecurity Technology · Kenya
Centurion CLAWS Roadway Spikes — Surface Mount CENTURION CLAWS Roadway Spikes — Surface Mount

Official Centurion family/configuration image.

Centurion · Roadway Access Control

CLAWS Roadway Spikes — Surface Mount

Surface-mounted CENTURION CLAWS roadway spike system for vehicle access control at barrier-controlled entrances and exits, installed above the road surface where recessing into the roadway is not practical. Specifications as published by CENTURION Systems for CLAWS.

  • Modular spike sections mounted above the roadway surface
  • Direct Drive from a co-installed SECTOR II, or Independent Drive
  • High-torque DC motor with battery backup
  • External limit switches for failsafe operation
Request quote — CLAWS Roadway Spikes — Surface MountWhatsApp enquiry+254 720 359 107Download datasheetCLAWS Direct Drive Installation Manual (1307.D.01.0004)CLAWS Independent Drive Installation Manual

Your enquiry carries the brand and exact product name automatically — no need to type it.

At a glance

Key features

  • Product type

    Roadway Spike System

  • Configuration

    Surface Mount — mounted above the roadway surface

  • Spike modules

    1 metre and 1.5 metre

  • Spikes raise / lower time

    Direct Drive: as per co-installed SECTOR II; Independent Drive: 1.2 sec

  • Load-bearing capacity

    2 tons per wheel

Only specifications published by the manufacturer for this model are listed. Anything not yet verified is confirmed in writing when we quote.

Specification

Technical specifications

Brand
Centurion
Product name
CLAWS Roadway Spikes — Surface Mount
Variant
Surface Mount
Unit of sale
Kit
Technology
Modular spike sections mounted above the roadway surface, Direct Drive from a co-installed SECTOR II, or Independent Drive, High-torque DC motor with battery backup, External limit switches for failsafe operation
Configuration
Surface Mount — mounted above the roadway surface
Installation
Mounted above the general road surface with ramp plates; no roadway trench required
Traffic effect
Creates a traffic-calming bump, slowing traffic at the access control point
Drive configurations
Direct Drive (uses the co-installed SECTOR II drive mechanism) or Independent Drive (own drive mechanism and controller)
Spike module lengths available
1 metre and 1.5 metre
Input voltage — Independent Drive
12 V DC
Power supply — Independent Drive
Battery driven (7 Ah, upgradable) with 2 A charger
Spikes raise / lower time
Direct Drive: as per co-installed SECTOR II; Independent Drive: 1.2 sec
Daily operations — maximum
Direct Drive: 50% of the co-installed SECTOR II original specification; Independent Drive: as per co-installed SECTOR II
Daily operations — mains present
Direct Drive: 50% of the co-installed SECTOR II original specification; Independent Drive: as per co-installed SECTOR II
Anti-corrosion specification — main chassis
Hot dip galvanised mild steel
Spike material specification
85 mm mild steel, electroplated and powder coated
Spike colour
Traffic yellow
Trench cover load-bearing capacity
2 tons per wheel
Onboard receiver — Independent Drive
CENTURION code-hopping, multichannel, 433 MHz, 500 remote control button storage capacity
Operating modes
Selectable High Security or Safety modes
Limit switches
External limit switches for failsafe operation
Orientation
Spike impact direction changeable to suit traffic flow

Specifications verified from the manufacturer's official product information. The product image shown is verified manufacturer imagery.

Manufacturer documents

Where it fits

Suitable applications

  • Residential driveways and homes
  • Estates and gated communities
  • Commercial and industrial yard entrances
  • Schools, clinics and institutional gates

If your site is not listed, tell us what you need to cover and we will advise whether this model suits it.

Catalogue classification

Category
Gate Automation
Subcategory
Roadway Access Control
Product type
Roadway Spike System

Pricing is not published. We quote per project based on quantity, site and installation scope.

Related products

Other roadway spike system models we supply

Image coming soon2m Steel Gate Rack

2m Steel Gate Rack

Steel gate rack for sliding-gate automation installations, supplied in 2 metre lengths with steel angle mounting brackets. Tooth pitch and motor compatibility are confirmed against the installed operator during the site survey.

  • Gate Rack
Request quoteDetails
Centurion D5-Evo SMΔRT sliding gate operator

Centurion

D5-Evo SMΔRT

Residential and light-commercial sliding gate operator for gates up to 500 kg, commissioned from a mobile device. Specifications as published by CENTURION Systems for this exact operator.

  • Sliding Gate Operator
Request quoteDetails

Back to the full catalogue